Socket RF5400542 Compact Flash RFID Reader Card 6E

In Stock?: Yes.  Socket RF5400542 - Compact flash High frequency RFID reader card. Read and write to high frequency RFID Tags with your Pocket PC. Socket Scan software enters tag ID number into any Windows Application as if it had been manually entered- no custom programming required. Supported on Pocket PC2003 windows mobile devices running windows CE.net v4.2 or later.




Manufacturer: Socket
Model: RF5400542
UPC: 758497054005












FEATURES- CF RFID Reader Card 6E- Single

Add plug-in RFID capabilities to Pocket PC applications!

Now add high frequency RFID capabilities to your mobile data
collection application with Sockets CompactFlash RFID Reader Card.

This product reads and writes to all ISO 15693 and many proprietary
13.56Mhz RFID tags being used or deployed for asset tracking,
access control, process control and healthcare/medical/
pharmaceutical applications.

Like all Sockets bar code scanning products, the RFID Reader card is
supported by SocketScan keyboard wedge software which sends the
RFID tag ID to any Windows application as virtual keystrokes -- No
custom programming needed! A small additional application allows
reading and writing to the accessible tag memory blocks. An SDK is
available for developers who wish to embed control of the RFID
Reader read/write functionality into their applications.

As with all of our products, Socket designed the Mobility Friendly
CF RFID Reader to use minimal power. Drawing only 11mA (36mW) in
idle mode, the CF RFID Reader will operate for hours without having
to recharge the batteries in your Pocket PC.

* Integrated Type II CF card plugs into the Type II CompactFlash slot of
Windows Powered Pocket PCs.
* High Frequency -- 13.56MHz Reader/Writer
* Read range -- Maximum 2.5 inches (6.35cm) -- Varies with size of tag
antenna.
* Reads all data from the most popular HF ISO 15693 tags, including:
ICode SLI/SL2, LRI512, my-d and Tag-It HF-I.
* Reads all data from ICode 1, Tag-It HF and PicoTag proprietary HF tags.
* Reads multiple tags simultaneously in Loop Mode.
* Supported by the same SocketScan and SDK that supports all Socket bar
code scanner products.
* Sockets SocketScan software sends tag ID code to any Windows application
as virtual keystrokes.
* SocketScan enables the creation of prefixes and suffixes, such as Tab or
Carriage Return, to further eliminate key strokes in the data collection
process.
* SocketScan enables the assignment of a beep tone to signify a successful
read.
* This Battery Friendly solution draws only a few milliamps of current in
standby mode, extending the battery life of your Pocket PC.
* No extra batteries or special power adapter required. The RFID Reader
Card gets power from the host Pocket PC.
* Works with Windows-based development tools so you can easily create
custom applications.

-- SPECIFICATIONs -----------------------------------

INTERFACE/BUS - Type II CompactFlash Card
SCANNER HEAD SIZE-
1.76" x 1.93" x 0.82"
FREQUENCY - 13.56MHz (HF)
READ RANGE - 2.5 inches (6.35cm)
Varies depending on tag antenna size
HF RFID TAGS SUPPORTED-
ISO15693
ICode SLI/SL2, LRI512, my-d & Tag-It HF-I
Proprietary: ICode 1, PicoTag, Tag-It HF
COMPATIBILITY - Windows COM port
OS SUPPORT - Windows CE.Net v4.2 (Windows Mobile)
APPROVALS - FCC: Part 15, Class B
CE: EN55024:1998
C-TICK: s.182
POWER- 3.3 volt power supply: Idle: 11 mA
Read/Write: approx 52 mA
Can also use 5V
SIZE - 1.43" x 1.68" x 0.20"

Warranty: 3 years
Shipping Weight: 0.5 lbs

Socket RF5400542 Compact Flash RFID Reader Card 6E
Price: $210.99

Can't find the item or accessory you are looking for? Check out our complete stock,
or e-mail us at info@thundermount.com.