Thunder Mountain the On-Line Store

Linksys WAP4400N Wireless-N Access Point with Power Over Ethernet
Linksys WAP4400N Wireless-N Access Point with Power Over Ethernet

Linksys WAP4400N Wireless-N Access Point with Power Over EthernetIn Stock?: Yes.  Linksys WAP4400N - The Linksys Wireless-N Access Point lets you connect Wireless-N (802.11n), Wireless-G (802.11g) or Wireless-B (802.11b) devices to your wired network so you can add PCs to the network with no cabling hassle.





Manufacturer: Linksys
Model: WAP4400N
UPC: 745883574858













FEATURES- Wireless-N Access Point with Power Over Ethernet
       High-Speed Wireless Access for Existing Networks! 
       With the growth in high bandwidth applications, such as storage and 
        video in the work place, network performance is essential. Wireless 
        technology is no longer lagging behind wired performance. The 
        introduction of the Linksys Business Series WAP4400N wireless 
        Access Point answers the growing business' need for access, speed 
        and security. 
       The Access Point uses the very latest wireless networking 
        technology, Wireless-N (draft 802.11n). By overlaying the signals 
        of multiple radios, Wireless-N's "Multiple In, Multiple Out" (MIMO) 
        technology multiplies the effective data rate. Unlike ordinary 
        wireless networking technologies that are confused by signal 
        reflections, MIMO actually uses these reflections to increase the 
        range and reduce "dead spots" in the wireless coverage area. 
       The Linksys Wireless-N Access Point lets you connect Wireless-N 
        (802.11n), Wireless-G (802.11g) or Wireless-B (802.11b) devices to 
        your wired network so you can add PCs to the network with no 
        cabling hassle. Power over Ethernet support makes it easy to 
        install -- you can mount the Access Point anywhere, even without 
        ready access to a power plug. With appropriate Power Over Ethernet 
        support at the other end, you only need to run one cable to the 
        Access Point to deliver both data and power. Of course, you can 
        also use the included AC adapter if your installation point has 
        power available nearby. 
       Moreover, the integrated QoS features provide consistent voice and 
        video quality on both the wired and wireless networks, enabling the 
        deployment of business qualilty VoIP and video applications. 
       To protect your data and privacy, the Linksys Wireless-N Access 
        Point supports both Wired Equivalent Privacy (WEP) and the 
        industrial-strength wireless security of Wi-Fi Protected Access  
        (WPA), encoding all your wireless transmissions with powerful 
        encryption. The MAC Address filter lets you decide exactly who has 
        access to your wireless network, and advanced logging keeps you 
        appraised. Configuration is a snap with the web browser-based 
        configuration utility. 
       The Linksys Wireless-N Access Point with Power Over Ethernet is the 
        best way to add wireless access to your existing business network.
    Includes Wireless-N Access Point with PoE, User Guide on CD-ROM,
      Ethernet Network Cable, Power Adapter, Product Stands, Registration 
      Card.
* Complies with IEEE draft 802.11n standards while at the same time being 
  backwards compatible with 802.11b and g devices.
* Standards-based POE (IEEE 802.3af) or External DC power 
* MIMO technology uses multiple radios to create a robust signal that 
  travels farther and reduces dead spots.
* Support for WMM provides improved QoS over wireless connections for 
  better video and voice performance.
     
  -- SPECIFICATIONs ------------------------------------
STANDARDS     - Draft IEEE802.11n, IEEE802.11g, IEEE802.11b, IEEE802.3, 
                  IEEE802.3u, IEEE802.3af (Power over Ethernet), 802.1x 
                  (Security Authentication), 802.11i - Ready (Security 
                  WPA2), 802.11e - Ready (Wireless QoS).
CONNECTORS    - (1) 10BaseT/100BaseTX/RJ45 port
BUTTONS       - Reset
CABLE TYPE    - UTP CAT 5
INDICATORS    - LEDs for Power, Ethernet, Wireless, POE
O/S SUPPORT   - Linux
SETUP/CONFIG  - WebUI          : Built in Web UI for easy browser-based 
                                   configuration (HTTP/HTTPS).
MANAGEMENT    - SNMP Version   : SNMP Version 1, 2c, 3
                Event Logging  : Remote Syslog
                Web Firmware   : upgradeable through web-browser
                Diagnostics    : Flash, RAM, LAN, WLAN
                DHCP           : DHCP Client
OPERATE MODES - Access Point   : Access Point Mode
WIRELESS      - Spec/Modulation: Radio and Modulation Type: 802.11b/DSSS, 
                                                                11g/OFDM, 
                                                                11n/OFDM
                Channels       : 11 North America
                                 13 Most of Europe (ETSI and Japan)
                Internal Ant.  : None
                External Ant.  : 3 (Omni-Directional)
                Transmit Power : Transmit Power (Adjustable) at Normal Temp 
                                   Range: 11b - 16 dBm at 1TX
                                                19 dBm at 2TX
                                          11g - 13 dBm at 1TX
                                                16 dBm at 2TX
                                          11n - 13 dBm at 1TX
                                                16 dBm at 2TX
                Antenna Gain   : 2 dBi
                Receiver 
                    Sensitivity: 11.n: 300Mbps at -69dbM
                                 11.g: 54Mbps at -73dBm
                                 11.b: 11Mbps at -88dBM
SECURITY      - WEP/WPA/WPA2   : WEP 64bit/128bit, WPA-PSK, WPA2-PSK, 
                                   WPA-ENT, WPA2-ENT.
                Access Control : Wireless connection control: MAC-based
                SSID Broadcast : SSID Broadcast enable/disable
                802.1X         : IEEE 802.1X support
QUALITY OF SERVICE-
                QoS            : 4 queues
                                 WMM Wireless priority
MISCELLANEOUS - Load Balancing
                New AP detection (used with WPC4400N)
                New client detection (used with WPC4400N)
                Auto-channel selection
APPROVALS     - FCC, CE, IC
POWER SOURCE  - 12V 1A DC input, and IEEE802.3af Compliant PoE
DIMENSIONS    - 7.8"w x 5.16"h x 7.8"         WT.- 0.84 lbs. 


Warranty: 1 year
Shipping Weight: 3.1 lbs

Linksys WAP4400N Wireless-N Access Point with Power Over Ethernet
Price: $161.99

Can't find the item or accessory you are looking for? Check out our complete stock,
or e-mail us at
info@thundermount.com.

View Shopping Cart
for Thunder Mountain
the On-Line Store
Return to
Thunder Mountain
the On-Line Store